Privacy Policy & Terms Of Use
1. Terms
By accessing this web site, you are agreeing to be bound by these web site Terms and Conditions of Use, applicable laws and regulations and their compliance. If you disagree with any of the stated terms and conditions, you are prohibited from using or accessing this site. The materials contained in this site are secured by relevant copyright and trade mark law.
2. Use License
Permission is allowed to temporarily download one duplicate of the materials (data or programming) on Runwayskiln’s site for individual and non-business use only. This is the just a permit of license and not an exchange of title, and under this permit you may not:
modify or copy the materials;
use the materials for any commercial use , or for any public presentation (business or non-business);
attempt to decompile or rebuild any product or material contained on Runwayskiln’s site;
remove any copyright or other restrictive documentations from the materials; or
transfer the materials to someone else or even “mirror” the materials on other server.
This permit might consequently be terminated if you disregard any of these confinements and may be ended by Runwayskiln whenever deemed. After permit termination or when your viewing permit is terminated, you must destroy any downloaded materials in your ownership whether in electronic or printed form.
3. Disclaimer
The materials on Runwayskiln’s site are given “as is”. Runwayskiln makes no guarantees, communicated or suggested, and thus renounces and nullifies every single other warranties, including without impediment, inferred guarantees or states of merchantability, fitness for a specific reason, or non-encroachment of licensed property or other infringement of rights. Further, Runwayskiln does not warrant or make any representations concerning the precision, likely results, or unwavering quality of the utilization of the materials on its Internet site or generally identifying with such materials or on any destinations connected to this website.
4. Constraints
In no occasion should Runwayskiln or its suppliers subject for any harms (counting, without constraint, harms for loss of information or benefit, or because of business interference,) emerging out of the utilization or powerlessness to utilize the materials on Runwayskiln’s Internet webpage, regardless of the possibility that Runwayskiln or a Runwayskiln approved agent has been told orally or in written of the likelihood of such harm. Since a few purviews don’t permit constraints on inferred guarantees, or impediments of obligation for weighty or coincidental harms, these confinements may not make a difference to you.
5. Amendments and Errata
The materials showing up on Runwayskiln’s site could incorporate typographical, or photographic mistakes. Runwayskiln does not warrant that any of the materials on its site are exact, finished, or current. Runwayskiln may roll out improvements to the materials contained on its site whenever without notification. Runwayskiln does not, then again, make any dedication to update the materials.
6. Links
Runwayskiln has not checked on the majority of the websites or links connected to its website and is not in charge of the substance of any such connected webpage. The incorporation of any connection does not infer support by Runwayskiln of the site. Utilization of any such connected site is at the user’s own risk.
7. Site Terms of Use Modifications
Runwayskiln may update these terms of utilization for its website whenever without notification. By utilizing this site you are consenting to be bound by the then current form of these Terms and Conditions of Use.
8. Governing Law
Any case identifying with Runwayskiln’s site should be administered by the laws of the country of Wales, UK Runwayskiln State without respect to its contention of law provisions.
General Terms and Conditions applicable to Use of a Web Site.
Privacy Policy
Your privacy is critical to us. Likewise, we have built up this Policy with the end goal you should see how we gather, utilize, impart and reveal and make utilization of individual data. The following blueprints our privacy policy.
Before or at the time of collecting personal information, we will identify the purposes for which information is being collected.
We will gather and utilization of individual data singularly with the target of satisfying those reasons indicated by us and for other good purposes, unless we get the assent of the individual concerned or as required by law.
We will just hold individual data the length of essential for the satisfaction of those reasons.
We will gather individual data by legal and reasonable means and, where fitting, with the information or assent of the individual concerned.
Personal information ought to be important to the reasons for which it is to be utilized, and, to the degree essential for those reasons, ought to be exact, finished, and updated.
We will protect individual data by security shields against misfortune or burglary, and also unapproved access, divulgence, duplicating, use or alteration.
We will promptly provide customers with access to our policies and procedures for the administration of individual data.
We are focused on leading our business as per these standards with a specific end goal to guarantee that the privacy of individual data is secure and maintained.
For a full list of data related activities that may be used, please see below;
Activity Log
This feature only records activities of a site’s registered users, and the retention duration of activity data will depend on the site’s plan and activity type.
Data Used: To deliver this functionality and record activities around site management, the following information is captured: user email address, user role, user login, user display name, WordPress.com and local user IDs, the activity to be recorded, the WordPress.com-connected site ID of the site on which the activity takes place, the site’s Jetpack version, and the timestamp of the activity. Some activities may also include the actor’s IP address (login attempts, for example) and user agent.
Activity Tracked: Login attempts/actions, post and page update and publish actions, comment/pingback submission and management actions, plugin and theme management actions, widget updates, user management actions, and the modification of other various site settings and options. Retention duration of activity data depends on the site’s plan and activity type. See the complete list of currently-recorded activities (along with retention information).
Data Synced (?): Successful and failed login attempts, which will include the actor’s IP address and user agent.
Ads
This feature is only available to sites on the Premium and Professional plans.
Data Used: The following information (made available from the visitor’s browser) is collected and sent to Automattic’s Demand Partners: IP address, geographical data (derived from the IP address), user agent, operating system, device type, unique user ID (randomly generated identifier), current URL, and IAB (Interactive Advertising Bureau) interest category. Log data (IP address, geographical data, user agent, operating system, device type) is stored for 30 days. The unique user ID is stored in cookies and is retained for 1 year.
Activity Tracked: Ad impressions, video-related events (i.e. pause, mute, 100% plays, etc.) or errors, and ad click events. Various cookies are used for the following purposes: delivering targeted advertisements to specific visitors, storing user identifiers, and collecting anonymous ad platform stats.
Carousel
Image views are only recorded if the site owner, has explicitly enabled image view stats tracking for this feature via the jetpack_enable_carousel_stats filter.
Data Used: If image view tracking is enabled, the following information is used: IP address, WordPress.com user ID (if logged in), WordPress.com username (if logged in), user agent, visiting URL, referring URL, timestamp of event, browser language, country code.
Activity Tracked: Image views.
Comment Likes
This feature is only accessible to users logged in to WordPress.com.
Data Used: In order to process a comment like, the following information is used: WordPress.com user ID/username (you must be logged in to use this feature), the local site-specific user ID (if the user is signed in to the site on which the like occurred), and a true/false data point that tells us if the user liked a specific comment. If you perform a like action from one of our mobile apps, some additional information is used to track the activity: IP address, user agent, timestamp of event, blog ID, browser language, country code, and device info.
Activity Tracked: Comment likes.
Contact Form
Data Used: If Akismet is enabled on the site, the contact form submission data — IP address, user agent, name, email address, website, and message — is submitted to the Akismet service (also owned by Automattic) for the sole purpose of spam checking. The actual submission data is stored in the database of the site on which it was submitted and is emailed directly to the owner of the form (i.e. the site author who published the page on which the contact form resides). This email will include the submitter’s IP address, timestamp, name, email address, website, and message.
Data Synced (?): Post and post meta data associated with a user’s contact form submission. If Akismet is enabled on the site, the IP address and user agent originally submitted with the comment are synced, as well, as they are stored in post meta.
Google Analytics
This feature is only available to sites on the Premium and Professional plans.
Data Used: Please refer to the appropriate Google Analytics documentation for the specific type of data it collects. For sites running WooCommerce (also owned by Automattic) and this feature simultaneously and having all purchase tracking explicitly enabled, purchase events will send Google Analytics the following information: order number, product id and name, product category, total cost, and quantity of items purchased. Google Analytics does offer IP anonymization, which can be enabled by the site owner.
Activity Tracked: This feature sends page view events (and potentially video play events) over to Google Analytics for consumption. For sites running WooCommerce-powered stores, some additional events are also sent to Google Analytics: shopping cart additions and removals, product listing views and clicks, product detail views, and purchases. Tracking for each specific WooCommerce event needs to be enabled by the site owner.
Gravatar Hovercards
Data Used: This feature will send a hash of the user’s email address (if logged in to the site or WordPress.com — or if they submitted a comment on the site using their email address that is attached to an active Gravatar profile) to the Gravatar service (also owned by Automattic) in order to retrieve their profile image.
Infinite Scroll
Data Used: In order to record page views via WordPress.com Stats (which must be enabled for page view tracking here to work) with additional loads, the following information is used: IP address, WordPress.com user ID (if logged in), WordPress.com username (if logged in), user agent, visiting URL, referring URL, timestamp of event, browser language, country code.
Activity Tracked: Page views will be tracked with each additional load (i.e. when you scroll down to the bottom of the page and a new set of posts loads automatically). If the site owner has enabled Google Analytics to work with this feature, a page view event will also be sent to the appropriate Google Analytics account with each additional load.
Jetpack Comments
Data Used: Commenter’s name, email address, and site URL (if provided via the comment form), timestamp, and IP address. Additionally, a jetpack.wordpress.com IFrame receives the following data: WordPress.com blog ID attached to the site, ID of the post on which the comment is being submitted, commenter’s local user ID (if available), commenter’s local username (if available), commenter’s site URL (if available), MD5 hash of the commenter’s email address (if available), and the comment content. If Akismet (also owned by Automattic) is enabled on the site, the following information is sent to the service for the sole purpose of spam checking: commenter’s name, email address, site URL, IP address, and user agent.
Activity Tracked: The comment author’s name, email address, and site URL (if provided during the comment submission) are stored in cookies. Learn more about these cookies.
Data Synced (?): All data and metadata (see above) associated with comments. This includes the status of the comment and, if Akismet is enabled on the site, whether or not it was classified as spam by Akismet.
Likes
This feature is only accessible to users logged in to WordPress.com.
Data Used: In order to process a post like action, the following information is used: IP address, WordPress.com user ID, WordPress.com username, WordPress.com-connected site ID (on which the post was liked), post ID (of the post that was liked), user agent, timestamp of event, browser language, country code.
Activity Tracked: Post likes.
Mobile Theme
Data Used: A visitor’s preference on viewing the mobile version of a site.
Activity Tracked: A cookie (akm_mobile) is stored for 3.5 days to remember whether or not a visitor of the site wishes to view its mobile version. Learn more about this cookie.
Notifications
This feature is only accessible to registered users of the site who are logged in to WordPress.com.
Data Used: IP address, WordPress.com user ID, WordPress.com username, WordPress.com-connected site ID and URL, Jetpack version, user agent, visiting URL, referring URL, timestamp of event, browser language, country code. Some visitor-related information or activity may be sent to the site owner via this feature. This may include: email address, WordPress.com username, site URL, email address, comment content, follow actions, etc.
Activity Tracked: Sending notifications (i.e. when we send a notification to a particular user), opening notifications (i.e. when a user opens a notification that they receive), performing an action from within the notification panel (e.g. liking a comment or marking a comment as spam), and clicking on any link from within the notification panel/interface.
Protect
Data Used: In order to check login activity and potentially block fraudulent attempts, the following information is used: attempting user’s IP address, attempting user’s email address/username (i.e. according to the value they were attempting to use during the login process), and all IP-related HTTP headers attached to the attempting user.
Activity Tracked: Failed login attempts (these include IP address and user agent). We also set a cookie (jpp_math_pass) for 1 day to remember if/when a user has successfully completed a math captcha to prove that they’re a real human. Learn more about this cookie.
Data Synced (?): Failed login attempts, which contain the user’s IP address, attempted username or email address, and user agent information.
Search
This feature is only available to sites on the Professional plan.
Data Used: Any of the visitor-chosen search filters and query data in order to process a search request on the WordPress.com servers.
Sharing
Data Used: When sharing content via email (this option is only available if Akismet is active on the site), the following information is used: sharing party’s name and email address (if the user is logged in, this information will be pulled directly from their account), IP address (for spam checking), user agent (for spam checking), and email body/content. This content will be sent to Akismet (also owned by Automattic) so that a spam check can be performed. Additionally, if reCAPTCHA (by Google) is enabled by the site owner, the sharing party’s IP address will be shared with that service. You can find Google’s privacy policy here.
Simple Payments
This feature is only available to sites on the Premium and Professional plans, and the actual payment processing is handled by PayPal.
Data Used: Transaction amount, transaction currency code, product title, product price, product ID, order quantity, PayPal payer ID, and PayPal transaction ID.
Activity Tracked: The PayPal payer ID, transaction ID, and HTTP referrer are sent with a payment completion tracking event that is attached to the site owner.
Data Synced (?): PayPal transaction ID, PayPal transaction status, PayPal product ID, quantity, price, customer email address, currency, and payment button CTA text.
Because payments are processed by PayPal, we recommend reviewing its privacy policy.
Subscriptions
Data Used: To initiate and process subscriptions, the following information is used: subscriber’s email address and the ID of the post or comment (depending on the specific subscription being processed). In the event of a new subscription being initiated, we also collect some basic server data, including all of the subscribing user’s HTTP request headers, the IP address from which the subscribing user is viewing the page, and the URI which was given in order to access the page (REQUEST_URI and DOCUMENT_URI). This server data used for the exclusive purpose of monitoring and preventing abuse and spam.
Activity Tracked: Functionality cookies are set for a duration of 347 days to remember a visitor’s blog and post subscription choices if, in fact, they have an active subscription.
Video Hosting
This feature is only available to sites on the Premium and Professional plans.
Data Used: For video play tracking via WordPress.com Stats, the following information is used: viewer’s IP address, WordPress.com user ID (if logged in), WordPress.com username (if logged in), user agent, visiting URL, referring URL, timestamp of event, browser language, country code. If Google Analytics is enabled, video play events will be sent there, as well.
Activity Tracked: Video plays.
WooCommerce Services
Data Used: For payments with PayPal or Stripe: purchase total, currency, billing information. For taxes: the value of goods in the cart, value of shipping, destination address. For checkout rates: destination address, purchased product IDs, dimensions, weight, and quantities. For shipping labels: customer’s name, address as well as the dimensions, weight, and quantities of purchased products.
Data Synced (?): For payments, we send the purchase total, currency and customer’s billing information to the respective payment processor. Please see the respective third party’s privacy policy (Stripe’s Privacy Policy and PayPal’s Privacy Policy) for more details. For automated taxes we send the value of goods in the cart, the value of shipping, and the destination address to TaxJar. Please see TaxJar’s Privacy Policy for details about how they handle this information. For checkout rates we send the destination ZIP/postal code and purchased product dimensions, weight and quantities to USPS or Canada Post, depending on the service used. For shipping labels we send the customer’s name, address as well as the dimensions, weight, and quantities of purchased products to EasyPost. We also store the purchased shipping labels on our server to make it easy to reprint them and handle support requests.
WordPress.com Secure Sign On
This feature is only accessible to registered users of the site with WordPress.com accounts.
Data Used: User ID (local site and WordPress.com), role (e.g. administrator), email address, username and display name. Additionally, for activity tracking (see below): IP address, WordPress.com user ID, WordPress.com username, WordPress.com-connected site ID and URL, Jetpack version, user agent, visiting URL, referring URL, timestamp of event, browser language, country code.
Activity Tracked: The following usage events are recorded: starting the login process, completing the login process, failing the login process, successfully being redirected after login, and failing to be redirected after login. Several functionality cookies are also set, and these are detailed explicitly in our Cookie documentation.
Data Synced (?): The user ID and role of any user who successfully signed in via this feature.
WordPress.com Stats
Data Used: IP address, WordPress.com user ID (if logged in), WordPress.com username (if logged in), user agent, visiting URL, referring URL, timestamp of event, browser language, country code. Important: The site owner does not have access to any of this information via this feature. For example, a site owner can see that a specific post has 285 views, but he/she cannot see which specific users/accounts viewed that post. Stats logs — containing visitor IP addresses and WordPress.com usernames (if available) — are retained by Automattic for 28 days and are used for the sole purpose of powering this feature.
Activity Tracked: Post and page views, video plays (if videos are hosted by WordPress.com), outbound link clicks, referring URLs and search engine terms, and country. When this module is enabled, Jetpack also tracks performance on each page load that includes the Javascript file used for tracking stats. This is exclusively for aggregate performance tracking across Jetpack sites in order to make sure that our plugin and code is not causing performance issues. This includes the tracking of page load times and resource loading duration (image files, Javascript files, CSS files, etc.). The site owner has the ability to force this feature to honor DNT settings of visitors. By default, DNT is currently not honored.
WordPress.com Toolbar
This feature is only accessible to registered users of the site who are also logged in to WordPress.com.
Data Used: Gravatar image URL of the logged-in user in order to display it in the toolbar and the WordPress.com user ID of the logged-in user. Additionally, for activity tracking (detailed below): IP address, WordPress.com user ID, WordPress.com username, WordPress.com-connected site ID and URL, Jetpack version, user agent, visiting URL, referring URL, timestamp of event, browser language, country code.
Activity Tracked: Click actions within the toolbar.
to be bound by these web site Terms and Conditions of Use, applicable laws and regulations and their compliance. If you disagree with any of the stated terms and conditions, you are prohibited from using or accessing this site. The materials contained in this site are secured by relevant copyright and trade mark law.
2. Use License
Permission is allowed to temporarily download one duplicate of the materials (data or programming) on Runwayskiln’s site for individual and non-business use only. This is the just a permit of license and not an exchange of title, and under this permit you may not:
modify or copy the materials;
use the materials for any commercial use , or for any public presentation (business or non-business);
attempt to decompile or rebuild any product or material contained on Runwayskiln’s site;
remove any copyright or other restrictive documentations from the materials; or
transfer the materials to someone else or even “mirror” the materials on other server.
This permit might consequently be terminated if you disregard any of these confinements and may be ended by Runwayskiln whenever deemed. After permit termination or when your viewing permit is terminated, you must destroy any downloaded materials in your ownership whether in electronic or printed form.
3. Disclaimer
The materials on Runwayskiln’s site are given “as is”. Runwayskiln makes no guarantees, communicated or suggested, and thus renounces and nullifies every single other warranties, including without impediment, inferred guarantees or states of merchantability, fitness for a specific reason, or non-encroachment of licensed property or other infringement of rights. Further, Runwayskiln does not warrant or make any representations concerning the precision, likely results, or unwavering quality of the utilization of the materials on its Internet site or generally identifying with such materials or on any destinations connected to this website.
4. Constraints
In no occasion should Runwayskiln or its suppliers subject for any harms (counting, without constraint, harms for loss of information or benefit, or because of business interference,) emerging out of the utilization or powerlessness to utilize the materials on Runwayskiln’s Internet webpage, regardless of the possibility that Runwayskiln or a Runwayskiln approved agent has been told orally or in written of the likelihood of such harm. Since a few purviews don’t permit constraints on inferred guarantees, or impediments of obligation for weighty or coincidental harms, these confinements may not make a difference to you.
5. Amendments and Errata
The materials showing up on Runwayskiln’s site could incorporate typographical, or photographic mistakes. Runwayskiln does not warrant that any of the materials on its site are exact, finished, or current. Runwayskiln may roll out improvements to the materials contained on its site whenever without notification. Runwayskiln does not, then again, make any dedication to update the materials.
6. Links
Runwayskiln has not checked on the majority of the websites or links connected to its website and is not in charge of the substance of any such connected webpage. The incorporation of any connection does not infer support by Runwayskiln of the site. Utilization of any such connected site is at the user’s own risk.
7. Site Terms of Use Modifications
Runwayskiln may update these terms of utilization for its website whenever without notification. By utilizing this site you are consenting to be bound by the then current form of these Terms and Conditions of Use.
8. Governing Law
Any case identifying with Runwayskiln’s site should be administered by the laws of the country of Wales, UK Runwayskiln State without respect to its contention of law provisions.
General Terms and Conditions applicable to Use of a Web Site.
Privacy Policy
Your privacy is critical to us. Likewise, we have built up this Policy with the end goal you should see how we gather, utilize, impart and reveal and make utilization of individual data. The following blueprints our privacy policy.
Before or at the time of collecting personal information, we will identify the purposes for which information is being collected.
We will gather and utilization of individual data singularly with the target of satisfying those reasons indicated by us and for other good purposes, unless we get the assent of the individual concerned or as required by law.
We will just hold individual data the length of essential for the satisfaction of those reasons.
We will gather individual data by legal and reasonable means and, where fitting, with the information or assent of the individual concerned.
Personal information ought to be important to the reasons for which it is to be utilized, and, to the degree essential for those reasons, ought to be exact, finished, and updated.
We will protect individual data by security shields against misfortune or burglary, and also unapproved access, divulgence, duplicating, use or alteration.
We will promptly provide customers with access to our policies and procedures for the administration of individual data.
We are focused on leading our business as per these standards with a specific end goal to guarantee that the privacy of individual data is secure and maintained.
For a full list of data related activities that may be used, please see below;
Activity Log
This feature only records activities of a site’s registered users, and the retention duration of activity data will depend on the site’s plan and activity type.
Data Used: To deliver this functionality and record activities around site management, the following information is captured: user email address, user role, user login, user display name, WordPress.com and local user IDs, the activity to be recorded, the WordPress.com-connected site ID of the site on which the activity takes place, the site’s Jetpack version, and the timestamp of the activity. Some activities may also include the actor’s IP address (login attempts, for example) and user agent.
Activity Tracked: Login attempts/actions, post and page update and publish actions, comment/pingback submission and management actions, plugin and theme management actions, widget updates, user management actions, and the modification of other various site settings and options. Retention duration of activity data depends on the site’s plan and activity type. See the complete list of currently-recorded activities (along with retention information).
Data Synced (?): Successful and failed login attempts, which will include the actor’s IP address and user agent.
Ads
This feature is only available to sites on the Premium and Professional plans.
Data Used: The following information (made available from the visitor’s browser) is collected and sent to Automattic’s Demand Partners: IP address, geographical data (derived from the IP address), user agent, operating system, device type, unique user ID (randomly generated identifier), current URL, and IAB (Interactive Advertising Bureau) interest category. Log data (IP address, geographical data, user agent, operating system, device type) is stored for 30 days. The unique user ID is stored in cookies and is retained for 1 year.
Activity Tracked: Ad impressions, video-related events (i.e. pause, mute, 100% plays, etc.) or errors, and ad click events. Various cookies are used for the following purposes: delivering targeted advertisements to specific visitors, storing user identifiers, and collecting anonymous ad platform stats.
Carousel
Image views are only recorded if the site owner, has explicitly enabled image view stats tracking for this feature via the jetpack_enable_carousel_stats filter.
Data Used: If image view tracking is enabled, the following information is used: IP address, WordPress.com user ID (if logged in), WordPress.com username (if logged in), user agent, visiting URL, referring URL, timestamp of event, browser language, country code.
Activity Tracked: Image views.
Comment Likes
This feature is only accessible to users logged in to WordPress.com.
Data Used: In order to process a comment like, the following information is used: WordPress.com user ID/username (you must be logged in to use this feature), the local site-specific user ID (if the user is signed in to the site on which the like occurred), and a true/false data point that tells us if the user liked a specific comment. If you perform a like action from one of our mobile apps, some additional information is used to track the activity: IP address, user agent, timestamp of event, blog ID, browser language, country code, and device info.
Activity Tracked: Comment likes.
Contact Form
Data Used: If Akismet is enabled on the site, the contact form submission data — IP address, user agent, name, email address, website, and message — is submitted to the Akismet service (also owned by Automattic) for the sole purpose of spam checking. The actual submission data is stored in the database of the site on which it was submitted and is emailed directly to the owner of the form (i.e. the site author who published the page on which the contact form resides). This email will include the submitter’s IP address, timestamp, name, email address, website, and message.
Data Synced (?): Post and post meta data associated with a user’s contact form submission. If Akismet is enabled on the site, the IP address and user agent originally submitted with the comment are synced, as well, as they are stored in post meta.
Google Analytics
This feature is only available to sites on the Premium and Professional plans.
Data Used: Please refer to the appropriate Google Analytics documentation for the specific type of data it collects. For sites running WooCommerce (also owned by Automattic) and this feature simultaneously and having all purchase tracking explicitly enabled, purchase events will send Google Analytics the following information: order number, product id and name, product category, total cost, and quantity of items purchased. Google Analytics does offer IP anonymization, which can be enabled by the site owner.
Activity Tracked: This feature sends page view events (and potentially video play events) over to Google Analytics for consumption. For sites running WooCommerce-powered stores, some additional events are also sent to Google Analytics: shopping cart additions and removals, product listing views and clicks, product detail views, and purchases. Tracking for each specific WooCommerce event needs to be enabled by the site owner.
Gravatar Hovercards
Data Used: This feature will send a hash of the user’s email address (if logged in to the site or WordPress.com — or if they submitted a comment on the site using their email address that is attached to an active Gravatar profile) to the Gravatar service (also owned by Automattic) in order to retrieve their profile image.
Infinite Scroll
Data Used: In order to record page views via WordPress.com Stats (which must be enabled for page view tracking here to work) with additional loads, the following information is used: IP address, WordPress.com user ID (if logged in), WordPress.com username (if logged in), user agent, visiting URL, referring URL, timestamp of event, browser language, country code.
Activity Tracked: Page views will be tracked with each additional load (i.e. when you scroll down to the bottom of the page and a new set of posts loads automatically). If the site owner has enabled Google Analytics to work with this feature, a page view event will also be sent to the appropriate Google Analytics account with each additional load.
Jetpack Comments
Data Used: Commenter’s name, email address, and site URL (if provided via the comment form), timestamp, and IP address. Additionally, a jetpack.wordpress.com IFrame receives the following data: WordPress.com blog ID attached to the site, ID of the post on which the comment is being submitted, commenter’s local user ID (if available), commenter’s local username (if available), commenter’s site URL (if available), MD5 hash of the commenter’s email address (if available), and the comment content. If Akismet (also owned by Automattic) is enabled on the site, the following information is sent to the service for the sole purpose of spam checking: commenter’s name, email address, site URL, IP address, and user agent.
Activity Tracked: The comment author’s name, email address, and site URL (if provided during the comment submission) are stored in cookies. Learn more about these cookies.
Data Synced (?): All data and metadata (see above) associated with comments. This includes the status of the comment and, if Akismet is enabled on the site, whether or not it was classified as spam by Akismet.
Likes
This feature is only accessible to users logged in to WordPress.com.
Data Used: In order to process a post like action, the following information is used: IP address, WordPress.com user ID, WordPress.com username, WordPress.com-connected site ID (on which the post was liked), post ID (of the post that was liked), user agent, timestamp of event, browser language, country code.
Activity Tracked: Post likes.
Mobile Theme
Data Used: A visitor’s preference on viewing the mobile version of a site.
Activity Tracked: A cookie (akm_mobile) is stored for 3.5 days to remember whether or not a visitor of the site wishes to view its mobile version. Learn more about this cookie.
Notifications
This feature is only accessible to registered users of the site who are logged in to WordPress.com.
Data Used: IP address, WordPress.com user ID, WordPress.com username, WordPress.com-connected site ID and URL, Jetpack version, user agent, visiting URL, referring URL, timestamp of event, browser language, country code. Some visitor-related information or activity may be sent to the site owner via this feature. This may include: email address, WordPress.com username, site URL, email address, comment content, follow actions, etc.
Activity Tracked: Sending notifications (i.e. when we send a notification to a particular user), opening notifications (i.e. when a user opens a notification that they receive), performing an action from within the notification panel (e.g. liking a comment or marking a comment as spam), and clicking on any link from within the notification panel/interface.
Protect
Data Used: In order to check login activity and potentially block fraudulent attempts, the following information is used: attempting user’s IP address, attempting user’s email address/username (i.e. according to the value they were attempting to use during the login process), and all IP-related HTTP headers attached to the attempting user.
Activity Tracked: Failed login attempts (these include IP address and user agent). We also set a cookie (jpp_math_pass) for 1 day to remember if/when a user has successfully completed a math captcha to prove that they’re a real human. Learn more about this cookie.
Data Synced (?): Failed login attempts, which contain the user’s IP address, attempted username or email address, and user agent information.
Search
This feature is only available to sites on the Professional plan.
Data Used: Any of the visitor-chosen search filters and query data in order to process a search request on the WordPress.com servers.
Sharing
Data Used: When sharing content via email (this option is only available if Akismet is active on the site), the following information is used: sharing party’s name and email address (if the user is logged in, this information will be pulled directly from their account), IP address (for spam checking), user agent (for spam checking), and email body/content. This content will be sent to Akismet (also owned by Automattic) so that a spam check can be performed. Additionally, if reCAPTCHA (by Google) is enabled by the site owner, the sharing party’s IP address will be shared with that service. You can find Google’s privacy policy here.
Simple Payments
This feature is only available to sites on the Premium and Professional plans, and the actual payment processing is handled by PayPal.
Data Used: Transaction amount, transaction currency code, product title, product price, product ID, order quantity, PayPal payer ID, and PayPal transaction ID.
Activity Tracked: The PayPal payer ID, transaction ID, and HTTP referrer are sent with a payment completion tracking event that is attached to the site owner.
Data Synced (?): PayPal transaction ID, PayPal transaction status, PayPal product ID, quantity, price, customer email address, currency, and payment button CTA text.
Because payments are processed by PayPal, we recommend reviewing its privacy policy.
Subscriptions
Data Used: To initiate and process subscriptions, the following information is used: subscriber’s email address and the ID of the post or comment (depending on the specific subscription being processed). In the event of a new subscription being initiated, we also collect some basic server data, including all of the subscribing user’s HTTP request headers, the IP address from which the subscribing user is viewing the page, and the URI which was given in order to access the page (REQUEST_URI and DOCUMENT_URI). This server data used for the exclusive purpose of monitoring and preventing abuse and spam.
Activity Tracked: Functionality cookies are set for a duration of 347 days to remember a visitor’s blog and post subscription choices if, in fact, they have an active subscription.
Video Hosting
This feature is only available to sites on the Premium and Professional plans.
Data Used: For video play tracking via WordPress.com Stats, the following information is used: viewer’s IP address, WordPress.com user ID (if logged in), WordPress.com username (if logged in), user agent, visiting URL, referring URL, timestamp of event, browser language, country code. If Google Analytics is enabled, video play events will be sent there, as well.
Activity Tracked: Video plays.
WooCommerce Services
Data Used: For payments with PayPal or Stripe: purchase total, currency, billing information. For taxes: the value of goods in the cart, value of shipping, destination address. For checkout rates: destination address, purchased product IDs, dimensions, weight, and quantities. For shipping labels: customer’s name, address as well as the dimensions, weight, and quantities of purchased products.
Data Synced (?): For payments, we send the purchase total, currency and customer’s billing information to the respective payment processor. Please see the respective third party’s privacy policy (Stripe’s Privacy Policy and PayPal’s Privacy Policy) for more details. For automated taxes we send the value of goods in the cart, the value of shipping, and the destination address to TaxJar. Please see TaxJar’s Privacy Policy for details about how they handle this information. For checkout rates we send the destination ZIP/postal code and purchased product dimensions, weight and quantities to USPS or Canada Post, depending on the service used. For shipping labels we send the customer’s name, address as well as the dimensions, weight, and quantities of purchased products to EasyPost. We also store the purchased shipping labels on our server to make it easy to reprint them and handle support requests.
WordPress.com Secure Sign On
This feature is only accessible to registered users of the site with WordPress.com accounts.
Data Used: User ID (local site and WordPress.com), role (e.g. administrator), email address, username and display name. Additionally, for activity tracking (see below): IP address, WordPress.com user ID, WordPress.com username, WordPress.com-connected site ID and URL, Jetpack version, user agent, visiting URL, referring URL, timestamp of event, browser language, country code.
Activity Tracked: The following usage events are recorded: starting the login process, completing the login process, failing the login process, successfully being redirected after login, and failing to be redirected after login. Several functionality cookies are also set, and these are detailed explicitly in our Cookie documentation.
Data Synced (?): The user ID and role of any user who successfully signed in via this feature.
WordPress.com Stats
Data Used: IP address, WordPress.com user ID (if logged in), WordPress.com username (if logged in), user agent, visiting URL, referring URL, timestamp of event, browser language, country code. Important: The site owner does not have access to any of this information via this feature. For example, a site owner can see that a specific post has 285 views, but he/she cannot see which specific users/accounts viewed that post. Stats logs — containing visitor IP addresses and WordPress.com usernames (if available) — are retained by Automattic for 28 days and are used for the sole purpose of powering this feature.
Activity Tracked: Post and page views, video plays (if videos are hosted by WordPress.com), outbound link clicks, referring URLs and search engine terms, and country. When this module is enabled, Jetpack also tracks performance on each page load that includes the Javascript file used for tracking stats. This is exclusively for aggregate performance tracking across Jetpack sites in order to make sure that our plugin and code is not causing performance issues. This includes the tracking of page load times and resource loading duration (image files, Javascript files, CSS files, etc.). The site owner has the ability to force this feature to honor DNT settings of visitors. By default, DNT is currently not honored.
WordPress.com Toolbar
This feature is only accessible to registered users of the site who are also logged in to WordPress.com.
Data Used: Gravatar image URL of the logged-in user in order to display it in the toolbar and the WordPress.com user ID of the logged-in user. Additionally, for activity tracking (detailed below): IP address, WordPress.com user ID, WordPress.com username, WordPress.com-connected site ID and URL, Jetpack version, user agent, visiting URL, referring URL, timestamp of event, browser language, country code.
Activity Tracked: Click actions within the toolbar.
By accessing this web site, you are agreeing to be bound by these web site Terms and Conditions of Use, applicable laws and regulations and their compliance. If you disagree with any of the stated terms and conditions, you are prohibited from using or accessing this site. The materials contained in this site are secured by relevant copyright and trade mark law.
2. Use License
Permission is allowed to temporarily download one duplicate of the materials (data or programming) on Runwayskiln’s site for individual and non-business use only. This is the just a permit of license and not an exchange of title, and under this permit you may not:
modify or copy the materials;
use the materials for any commercial use , or for any public presentation (business or non-business);
attempt to decompile or rebuild any product or material contained on Runwayskiln’s site;
remove any copyright or other restrictive documentations from the materials; or
transfer the materials to someone else or even “mirror” the materials on other server.
This permit might consequently be terminated if you disregard any of these confinements and may be ended by Runwayskiln whenever deemed. After permit termination or when your viewing permit is terminated, you must destroy any downloaded materials in your ownership whether in electronic or printed form.
3. Disclaimer
The materials on Runwayskiln’s site are given “as is”. Runwayskiln makes no guarantees, communicated or suggested, and thus renounces and nullifies every single other warranties, including without impediment, inferred guarantees or states of merchantability, fitness for a specific reason, or non-encroachment of licensed property or other infringement of rights. Further, Runwayskiln does not warrant or make any representations concerning the precision, likely results, or unwavering quality of the utilization of the materials on its Internet site or generally identifying with such materials or on any destinations connected to this website.
4. Constraints
In no occasion should Runwayskiln or its suppliers subject for any harms (counting, without constraint, harms for loss of information or benefit, or because of business interference,) emerging out of the utilization or powerlessness to utilize the materials on Runwayskiln’s Internet webpage, regardless of the possibility that Runwayskiln or a Runwayskiln approved agent has been told orally or in written of the likelihood of such harm. Since a few purviews don’t permit constraints on inferred guarantees, or impediments of obligation for weighty or coincidental harms, these confinements may not make a difference to you.
5. Amendments and Errata
The materials showing up on Runwayskiln’s site could incorporate typographical, or photographic mistakes. Runwayskiln does not warrant that any of the materials on its site are exact, finished, or current. Runwayskiln may roll out improvements to the materials contained on its site whenever without notification. Runwayskiln does not, then again, make any dedication to update the materials.
6. Links
Runwayskiln has not checked on the majority of the websites or links connected to its website and is not in charge of the substance of any such connected webpage. The incorporation of any connection does not infer support by Runwayskiln of the site. Utilization of any such connected site is at the user’s own risk.
7. Site Terms of Use Modifications
Runwayskiln may update these terms of utilization for its website whenever without notification. By utilizing this site you are consenting to be bound by the then current form of these Terms and Conditions of Use.
8. Governing Law
Any case identifying with Runwayskiln’s site should be administered by the laws of the country of Wales, UK Runwayskiln State without respect to its contention of law provisions.
General Terms and Conditions applicable to Use of a Web Site.
Privacy Policy
Your privacy is critical to us. Likewise, we have built up this Policy with the end goal you should see how we gather, utilize, impart and reveal and make utilization of individual data. The following blueprints our privacy policy.
Before or at the time of collecting personal information, we will identify the purposes for which information is being collected.
We will gather and utilization of individual data singularly with the target of satisfying those reasons indicated by us and for other good purposes, unless we get the assent of the individual concerned or as required by law.
We will just hold individual data the length of essential for the satisfaction of those reasons.
We will gather individual data by legal and reasonable means and, where fitting, with the information or assent of the individual concerned.
Personal information ought to be important to the reasons for which it is to be utilized, and, to the degree essential for those reasons, ought to be exact, finished, and updated.
We will protect individual data by security shields against misfortune or burglary, and also unapproved access, divulgence, duplicating, use or alteration.
We will promptly provide customers with access to our policies and procedures for the administration of individual data.
We are focused on leading our business as per these standards with a specific end goal to guarantee that the privacy of individual data is secure and maintained.
For a full list of data related activities that may be used, please see below;
Activity Log
This feature only records activities of a site’s registered users, and the retention duration of activity data will depend on the site’s plan and activity type.
Data Used: To deliver this functionality and record activities around site management, the following information is captured: user email address, user role, user login, user display name, WordPress.com and local user IDs, the activity to be recorded, the WordPress.com-connected site ID of the site on which the activity takes place, the site’s Jetpack version, and the timestamp of the activity. Some activities may also include the actor’s IP address (login attempts, for example) and user agent.
Activity Tracked: Login attempts/actions, post and page update and publish actions, comment/pingback submission and management actions, plugin and theme management actions, widget updates, user management actions, and the modification of other various site settings and options. Retention duration of activity data depends on the site’s plan and activity type. See the complete list of currently-recorded activities (along with retention information).
Data Synced (?): Successful and failed login attempts, which will include the actor’s IP address and user agent.
Ads
This feature is only available to sites on the Premium and Professional plans.
Data Used: The following information (made available from the visitor’s browser) is collected and sent to Automattic’s Demand Partners: IP address, geographical data (derived from the IP address), user agent, operating system, device type, unique user ID (randomly generated identifier), current URL, and IAB (Interactive Advertising Bureau) interest category. Log data (IP address, geographical data, user agent, operating system, device type) is stored for 30 days. The unique user ID is stored in cookies and is retained for 1 year.
Activity Tracked: Ad impressions, video-related events (i.e. pause, mute, 100% plays, etc.) or errors, and ad click events. Various cookies are used for the following purposes: delivering targeted advertisements to specific visitors, storing user identifiers, and collecting anonymous ad platform stats.
Carousel
Image views are only recorded if the site owner, has explicitly enabled image view stats tracking for this feature via the jetpack_enable_carousel_stats filter.
Data Used: If image view tracking is enabled, the following information is used: IP address, WordPress.com user ID (if logged in), WordPress.com username (if logged in), user agent, visiting URL, referring URL, timestamp of event, browser language, country code.
Activity Tracked: Image views.
Comment Likes
This feature is only accessible to users logged in to WordPress.com.
Data Used: In order to process a comment like, the following information is used: WordPress.com user ID/username (you must be logged in to use this feature), the local site-specific user ID (if the user is signed in to the site on which the like occurred), and a true/false data point that tells us if the user liked a specific comment. If you perform a like action from one of our mobile apps, some additional information is used to track the activity: IP address, user agent, timestamp of event, blog ID, browser language, country code, and device info.
Activity Tracked: Comment likes.
Contact Form
Data Used: If Akismet is enabled on the site, the contact form submission data — IP address, user agent, name, email address, website, and message — is submitted to the Akismet service (also owned by Automattic) for the sole purpose of spam checking. The actual submission data is stored in the database of the site on which it was submitted and is emailed directly to the owner of the form (i.e. the site author who published the page on which the contact form resides). This email will include the submitter’s IP address, timestamp, name, email address, website, and message.
Data Synced (?): Post and post meta data associated with a user’s contact form submission. If Akismet is enabled on the site, the IP address and user agent originally submitted with the comment are synced, as well, as they are stored in post meta.
Google Analytics
This feature is only available to sites on the Premium and Professional plans.
Data Used: Please refer to the appropriate Google Analytics documentation for the specific type of data it collects. For sites running WooCommerce (also owned by Automattic) and this feature simultaneously and having all purchase tracking explicitly enabled, purchase events will send Google Analytics the following information: order number, product id and name, product category, total cost, and quantity of items purchased. Google Analytics does offer IP anonymization, which can be enabled by the site owner.
Activity Tracked: This feature sends page view events (and potentially video play events) over to Google Analytics for consumption. For sites running WooCommerce-powered stores, some additional events are also sent to Google Analytics: shopping cart additions and removals, product listing views and clicks, product detail views, and purchases. Tracking for each specific WooCommerce event needs to be enabled by the site owner.
Gravatar Hovercards
Data Used: This feature will send a hash of the user’s email address (if logged in to the site or WordPress.com — or if they submitted a comment on the site using their email address that is attached to an active Gravatar profile) to the Gravatar service (also owned by Automattic) in order to retrieve their profile image.
Infinite Scroll
Data Used: In order to record page views via WordPress.com Stats (which must be enabled for page view tracking here to work) with additional loads, the following information is used: IP address, WordPress.com user ID (if logged in), WordPress.com username (if logged in), user agent, visiting URL, referring URL, timestamp of event, browser language, country code.
Activity Tracked: Page views will be tracked with each additional load (i.e. when you scroll down to the bottom of the page and a new set of posts loads automatically). If the site owner has enabled Google Analytics to work with this feature, a page view event will also be sent to the appropriate Google Analytics account with each additional load.
Jetpack Comments
Data Used: Commenter’s name, email address, and site URL (if provided via the comment form), timestamp, and IP address. Additionally, a jetpack.wordpress.com IFrame receives the following data: WordPress.com blog ID attached to the site, ID of the post on which the comment is being submitted, commenter’s local user ID (if available), commenter’s local username (if available), commenter’s site URL (if available), MD5 hash of the commenter’s email address (if available), and the comment content. If Akismet (also owned by Automattic) is enabled on the site, the following information is sent to the service for the sole purpose of spam checking: commenter’s name, email address, site URL, IP address, and user agent.
Activity Tracked: The comment author’s name, email address, and site URL (if provided during the comment submission) are stored in cookies. Learn more about these cookies.
Data Synced (?): All data and metadata (see above) associated with comments. This includes the status of the comment and, if Akismet is enabled on the site, whether or not it was classified as spam by Akismet.
Likes
This feature is only accessible to users logged in to WordPress.com.
Data Used: In order to process a post like action, the following information is used: IP address, WordPress.com user ID, WordPress.com username, WordPress.com-connected site ID (on which the post was liked), post ID (of the post that was liked), user agent, timestamp of event, browser language, country code.
Activity Tracked: Post likes.
Mobile Theme
Data Used: A visitor’s preference on viewing the mobile version of a site.
Activity Tracked: A cookie (akm_mobile) is stored for 3.5 days to remember whether or not a visitor of the site wishes to view its mobile version. Learn more about this cookie.
Notifications
This feature is only accessible to registered users of the site who are logged in to WordPress.com.
Data Used: IP address, WordPress.com user ID, WordPress.com username, WordPress.com-connected site ID and URL, Jetpack version, user agent, visiting URL, referring URL, timestamp of event, browser language, country code. Some visitor-related information or activity may be sent to the site owner via this feature. This may include: email address, WordPress.com username, site URL, email address, comment content, follow actions, etc.
Activity Tracked: Sending notifications (i.e. when we send a notification to a particular user), opening notifications (i.e. when a user opens a notification that they receive), performing an action from within the notification panel (e.g. liking a comment or marking a comment as spam), and clicking on any link from within the notification panel/interface.
Protect
Data Used: In order to check login activity and potentially block fraudulent attempts, the following information is used: attempting user’s IP address, attempting user’s email address/username (i.e. according to the value they were attempting to use during the login process), and all IP-related HTTP headers attached to the attempting user.
Activity Tracked: Failed login attempts (these include IP address and user agent). We also set a cookie (jpp_math_pass) for 1 day to remember if/when a user has successfully completed a math captcha to prove that they’re a real human. Learn more about this cookie.
Data Synced (?): Failed login attempts, which contain the user’s IP address, attempted username or email address, and user agent information.
Search
This feature is only available to sites on the Professional plan.
Data Used: Any of the visitor-chosen search filters and query data in order to process a search request on the WordPress.com servers.
Sharing
Data Used: When sharing content via email (this option is only available if Akismet is active on the site), the following information is used: sharing party’s name and email address (if the user is logged in, this information will be pulled directly from their account), IP address (for spam checking), user agent (for spam checking), and email body/content. This content will be sent to Akismet (also owned by Automattic) so that a spam check can be performed. Additionally, if reCAPTCHA (by Google) is enabled by the site owner, the sharing party’s IP address will be shared with that service. You can find Google’s privacy policy here.
Simple Payments
This feature is only available to sites on the Premium and Professional plans, and the actual payment processing is handled by PayPal.
Data Used: Transaction amount, transaction currency code, product title, product price, product ID, order quantity, PayPal payer ID, and PayPal transaction ID.
Activity Tracked: The PayPal payer ID, transaction ID, and HTTP referrer are sent with a payment completion tracking event that is attached to the site owner.
Data Synced (?): PayPal transaction ID, PayPal transaction status, PayPal product ID, quantity, price, customer email address, currency, and payment button CTA text.
Because payments are processed by PayPal, we recommend reviewing its privacy policy.
Subscriptions
Data Used: To initiate and process subscriptions, the following information is used: subscriber’s email address and the ID of the post or comment (depending on the specific subscription being processed). In the event of a new subscription being initiated, we also collect some basic server data, including all of the subscribing user’s HTTP request headers, the IP address from which the subscribing user is viewing the page, and the URI which was given in order to access the page (REQUEST_URI and DOCUMENT_URI). This server data used for the exclusive purpose of monitoring and preventing abuse and spam.
Activity Tracked: Functionality cookies are set for a duration of 347 days to remember a visitor’s blog and post subscription choices if, in fact, they have an active subscription.
Video Hosting
This feature is only available to sites on the Premium and Professional plans.
Data Used: For video play tracking via WordPress.com Stats, the following information is used: viewer’s IP address, WordPress.com user ID (if logged in), WordPress.com username (if logged in), user agent, visiting URL, referring URL, timestamp of event, browser language, country code. If Google Analytics is enabled, video play events will be sent there, as well.
Activity Tracked: Video plays.
WooCommerce Services
Data Used: For payments with PayPal or Stripe: purchase total, currency, billing information. For taxes: the value of goods in the cart, value of shipping, destination address. For checkout rates: destination address, purchased product IDs, dimensions, weight, and quantities. For shipping labels: customer’s name, address as well as the dimensions, weight, and quantities of purchased products.
Data Synced (?): For payments, we send the purchase total, currency and customer’s billing information to the respective payment processor. Please see the respective third party’s privacy policy (Stripe’s Privacy Policy and PayPal’s Privacy Policy) for more details. For automated taxes we send the value of goods in the cart, the value of shipping, and the destination address to TaxJar. Please see TaxJar’s Privacy Policy for details about how they handle this information. For checkout rates we send the destination ZIP/postal code and purchased product dimensions, weight and quantities to USPS or Canada Post, depending on the service used. For shipping labels we send the customer’s name, address as well as the dimensions, weight, and quantities of purchased products to EasyPost. We also store the purchased shipping labels on our server to make it easy to reprint them and handle support requests.
WordPress.com Secure Sign On
This feature is only accessible to registered users of the site with WordPress.com accounts.
Data Used: User ID (local site and WordPress.com), role (e.g. administrator), email address, username and display name. Additionally, for activity tracking (see below): IP address, WordPress.com user ID, WordPress.com username, WordPress.com-connected site ID and URL, Jetpack version, user agent, visiting URL, referring URL, timestamp of event, browser language, country code.
Activity Tracked: The following usage events are recorded: starting the login process, completing the login process, failing the login process, successfully being redirected after login, and failing to be redirected after login. Several functionality cookies are also set, and these are detailed explicitly in our Cookie documentation.
Data Synced (?): The user ID and role of any user who successfully signed in via this feature.
WordPress.com Stats
Data Used: IP address, WordPress.com user ID (if logged in), WordPress.com username (if logged in), user agent, visiting URL, referring URL, timestamp of event, browser language, country code. Important: The site owner does not have access to any of this information via this feature. For example, a site owner can see that a specific post has 285 views, but he/she cannot see which specific users/accounts viewed that post. Stats logs — containing visitor IP addresses and WordPress.com usernames (if available) — are retained by Automattic for 28 days and are used for the sole purpose of powering this feature.
Activity Tracked: Post and page views, video plays (if videos are hosted by WordPress.com), outbound link clicks, referring URLs and search engine terms, and country. When this module is enabled, Jetpack also tracks performance on each page load that includes the Javascript file used for tracking stats. This is exclusively for aggregate performance tracking across Jetpack sites in order to make sure that our plugin and code is not causing performance issues. This includes the tracking of page load times and resource loading duration (image files, Javascript files, CSS files, etc.). The site owner has the ability to force this feature to honor DNT settings of visitors. By default, DNT is currently not honored.
WordPress.com Toolbar
This feature is only accessible to registered users of the site who are also logged in to WordPress.com.
Data Used: Gravatar image URL of the logged-in user in order to display it in the toolbar and the WordPress.com user ID of the logged-in user. Additionally, for activity tracking (detailed below): IP address, WordPress.com user ID, WordPress.com username, WordPress.com-connected site ID and URL, Jetpack version, user agent, visiting URL, referring URL, timestamp of event, browser language, country code.
Activity Tracked: Click actions within the toolbar.
to be bound by these web site Terms and Conditions of Use, applicable laws and regulations and their compliance. If you disagree with any of the stated terms and conditions, you are prohibited from using or accessing this site. The materials contained in this site are secured by relevant copyright and trade mark law.
2. Use License
Permission is allowed to temporarily download one duplicate of the materials (data or programming) on Runwayskiln’s site for individual and non-business use only. This is the just a permit of license and not an exchange of title, and under this permit you may not:
modify or copy the materials;
use the materials for any commercial use , or for any public presentation (business or non-business);
attempt to decompile or rebuild any product or material contained on Runwayskiln’s site;
remove any copyright or other restrictive documentations from the materials; or
transfer the materials to someone else or even “mirror” the materials on other server.
This permit might consequently be terminated if you disregard any of these confinements and may be ended by Runwayskiln whenever deemed. After permit termination or when your viewing permit is terminated, you must destroy any downloaded materials in your ownership whether in electronic or printed form.
3. Disclaimer
The materials on Runwayskiln’s site are given “as is”. Runwayskiln makes no guarantees, communicated or suggested, and thus renounces and nullifies every single other warranties, including without impediment, inferred guarantees or states of merchantability, fitness for a specific reason, or non-encroachment of licensed property or other infringement of rights. Further, Runwayskiln does not warrant or make any representations concerning the precision, likely results, or unwavering quality of the utilization of the materials on its Internet site or generally identifying with such materials or on any destinations connected to this website.
4. Constraints
In no occasion should Runwayskiln or its suppliers subject for any harms (counting, without constraint, harms for loss of information or benefit, or because of business interference,) emerging out of the utilization or powerlessness to utilize the materials on Runwayskiln’s Internet webpage, regardless of the possibility that Runwayskiln or a Runwayskiln approved agent has been told orally or in written of the likelihood of such harm. Since a few purviews don’t permit constraints on inferred guarantees, or impediments of obligation for weighty or coincidental harms, these confinements may not make a difference to you.
5. Amendments and Errata
The materials showing up on Runwayskiln’s site could incorporate typographical, or photographic mistakes. Runwayskiln does not warrant that any of the materials on its site are exact, finished, or current. Runwayskiln may roll out improvements to the materials contained on its site whenever without notification. Runwayskiln does not, then again, make any dedication to update the materials.
6. Links
Runwayskiln has not checked on the majority of the websites or links connected to its website and is not in charge of the substance of any such connected webpage. The incorporation of any connection does not infer support by Runwayskiln of the site. Utilization of any such connected site is at the user’s own risk.
7. Site Terms of Use Modifications
Runwayskiln may update these terms of utilization for its website whenever without notification. By utilizing this site you are consenting to be bound by the then current form of these Terms and Conditions of Use.
8. Governing Law
Any case identifying with Runwayskiln’s site should be administered by the laws of the country of Wales, UK Runwayskiln State without respect to its contention of law provisions.
General Terms and Conditions applicable to Use of a Web Site.
Privacy Policy
Your privacy is critical to us. Likewise, we have built up this Policy with the end goal you should see how we gather, utilize, impart and reveal and make utilization of individual data. The following blueprints our privacy policy.
Before or at the time of collecting personal information, we will identify the purposes for which information is being collected.
We will gather and utilization of individual data singularly with the target of satisfying those reasons indicated by us and for other good purposes, unless we get the assent of the individual concerned or as required by law.
We will just hold individual data the length of essential for the satisfaction of those reasons.
We will gather individual data by legal and reasonable means and, where fitting, with the information or assent of the individual concerned.
Personal information ought to be important to the reasons for which it is to be utilized, and, to the degree essential for those reasons, ought to be exact, finished, and updated.
We will protect individual data by security shields against misfortune or burglary, and also unapproved access, divulgence, duplicating, use or alteration.
We will promptly provide customers with access to our policies and procedures for the administration of individual data.
We are focused on leading our business as per these standards with a specific end goal to guarantee that the privacy of individual data is secure and maintained.
For a full list of data related activities that may be used, please see below;
Activity Log
This feature only records activities of a site’s registered users, and the retention duration of activity data will depend on the site’s plan and activity type.
Data Used: To deliver this functionality and record activities around site management, the following information is captured: user email address, user role, user login, user display name, WordPress.com and local user IDs, the activity to be recorded, the WordPress.com-connected site ID of the site on which the activity takes place, the site’s Jetpack version, and the timestamp of the activity. Some activities may also include the actor’s IP address (login attempts, for example) and user agent.
Activity Tracked: Login attempts/actions, post and page update and publish actions, comment/pingback submission and management actions, plugin and theme management actions, widget updates, user management actions, and the modification of other various site settings and options. Retention duration of activity data depends on the site’s plan and activity type. See the complete list of currently-recorded activities (along with retention information).
Data Synced (?): Successful and failed login attempts, which will include the actor’s IP address and user agent.
Ads
This feature is only available to sites on the Premium and Professional plans.
Data Used: The following information (made available from the visitor’s browser) is collected and sent to Automattic’s Demand Partners: IP address, geographical data (derived from the IP address), user agent, operating system, device type, unique user ID (randomly generated identifier), current URL, and IAB (Interactive Advertising Bureau) interest category. Log data (IP address, geographical data, user agent, operating system, device type) is stored for 30 days. The unique user ID is stored in cookies and is retained for 1 year.
Activity Tracked: Ad impressions, video-related events (i.e. pause, mute, 100% plays, etc.) or errors, and ad click events. Various cookies are used for the following purposes: delivering targeted advertisements to specific visitors, storing user identifiers, and collecting anonymous ad platform stats.
Carousel
Image views are only recorded if the site owner, has explicitly enabled image view stats tracking for this feature via the jetpack_enable_carousel_stats filter.
Data Used: If image view tracking is enabled, the following information is used: IP address, WordPress.com user ID (if logged in), WordPress.com username (if logged in), user agent, visiting URL, referring URL, timestamp of event, browser language, country code.
Activity Tracked: Image views.
Comment Likes
This feature is only accessible to users logged in to WordPress.com.
Data Used: In order to process a comment like, the following information is used: WordPress.com user ID/username (you must be logged in to use this feature), the local site-specific user ID (if the user is signed in to the site on which the like occurred), and a true/false data point that tells us if the user liked a specific comment. If you perform a like action from one of our mobile apps, some additional information is used to track the activity: IP address, user agent, timestamp of event, blog ID, browser language, country code, and device info.
Activity Tracked: Comment likes.
Contact Form
Data Used: If Akismet is enabled on the site, the contact form submission data — IP address, user agent, name, email address, website, and message — is submitted to the Akismet service (also owned by Automattic) for the sole purpose of spam checking. The actual submission data is stored in the database of the site on which it was submitted and is emailed directly to the owner of the form (i.e. the site author who published the page on which the contact form resides). This email will include the submitter’s IP address, timestamp, name, email address, website, and message.
Data Synced (?): Post and post meta data associated with a user’s contact form submission. If Akismet is enabled on the site, the IP address and user agent originally submitted with the comment are synced, as well, as they are stored in post meta.
Google Analytics
This feature is only available to sites on the Premium and Professional plans.
Data Used: Please refer to the appropriate Google Analytics documentation for the specific type of data it collects. For sites running WooCommerce (also owned by Automattic) and this feature simultaneously and having all purchase tracking explicitly enabled, purchase events will send Google Analytics the following information: order number, product id and name, product category, total cost, and quantity of items purchased. Google Analytics does offer IP anonymization, which can be enabled by the site owner.
Activity Tracked: This feature sends page view events (and potentially video play events) over to Google Analytics for consumption. For sites running WooCommerce-powered stores, some additional events are also sent to Google Analytics: shopping cart additions and removals, product listing views and clicks, product detail views, and purchases. Tracking for each specific WooCommerce event needs to be enabled by the site owner.
Gravatar Hovercards
Data Used: This feature will send a hash of the user’s email address (if logged in to the site or WordPress.com — or if they submitted a comment on the site using their email address that is attached to an active Gravatar profile) to the Gravatar service (also owned by Automattic) in order to retrieve their profile image.
Infinite Scroll
Data Used: In order to record page views via WordPress.com Stats (which must be enabled for page view tracking here to work) with additional loads, the following information is used: IP address, WordPress.com user ID (if logged in), WordPress.com username (if logged in), user agent, visiting URL, referring URL, timestamp of event, browser language, country code.
Activity Tracked: Page views will be tracked with each additional load (i.e. when you scroll down to the bottom of the page and a new set of posts loads automatically). If the site owner has enabled Google Analytics to work with this feature, a page view event will also be sent to the appropriate Google Analytics account with each additional load.
Jetpack Comments
Data Used: Commenter’s name, email address, and site URL (if provided via the comment form), timestamp, and IP address. Additionally, a jetpack.wordpress.com IFrame receives the following data: WordPress.com blog ID attached to the site, ID of the post on which the comment is being submitted, commenter’s local user ID (if available), commenter’s local username (if available), commenter’s site URL (if available), MD5 hash of the commenter’s email address (if available), and the comment content. If Akismet (also owned by Automattic) is enabled on the site, the following information is sent to the service for the sole purpose of spam checking: commenter’s name, email address, site URL, IP address, and user agent.
Activity Tracked: The comment author’s name, email address, and site URL (if provided during the comment submission) are stored in cookies. Learn more about these cookies.
Data Synced (?): All data and metadata (see above) associated with comments. This includes the status of the comment and, if Akismet is enabled on the site, whether or not it was classified as spam by Akismet.
Likes
This feature is only accessible to users logged in to WordPress.com.
Data Used: In order to process a post like action, the following information is used: IP address, WordPress.com user ID, WordPress.com username, WordPress.com-connected site ID (on which the post was liked), post ID (of the post that was liked), user agent, timestamp of event, browser language, country code.
Activity Tracked: Post likes.
Mobile Theme
Data Used: A visitor’s preference on viewing the mobile version of a site.
Activity Tracked: A cookie (akm_mobile) is stored for 3.5 days to remember whether or not a visitor of the site wishes to view its mobile version. Learn more about this cookie.
Notifications
This feature is only accessible to registered users of the site who are logged in to WordPress.com.
Data Used: IP address, WordPress.com user ID, WordPress.com username, WordPress.com-connected site ID and URL, Jetpack version, user agent, visiting URL, referring URL, timestamp of event, browser language, country code. Some visitor-related information or activity may be sent to the site owner via this feature. This may include: email address, WordPress.com username, site URL, email address, comment content, follow actions, etc.
Activity Tracked: Sending notifications (i.e. when we send a notification to a particular user), opening notifications (i.e. when a user opens a notification that they receive), performing an action from within the notification panel (e.g. liking a comment or marking a comment as spam), and clicking on any link from within the notification panel/interface.
Protect
Data Used: In order to check login activity and potentially block fraudulent attempts, the following information is used: attempting user’s IP address, attempting user’s email address/username (i.e. according to the value they were attempting to use during the login process), and all IP-related HTTP headers attached to the attempting user.
Activity Tracked: Failed login attempts (these include IP address and user agent). We also set a cookie (jpp_math_pass) for 1 day to remember if/when a user has successfully completed a math captcha to prove that they’re a real human. Learn more about this cookie.
Data Synced (?): Failed login attempts, which contain the user’s IP address, attempted username or email address, and user agent information.
Search
This feature is only available to sites on the Professional plan.
Data Used: Any of the visitor-chosen search filters and query data in order to process a search request on the WordPress.com servers.
Sharing
Data Used: When sharing content via email (this option is only available if Akismet is active on the site), the following information is used: sharing party’s name and email address (if the user is logged in, this information will be pulled directly from their account), IP address (for spam checking), user agent (for spam checking), and email body/content. This content will be sent to Akismet (also owned by Automattic) so that a spam check can be performed. Additionally, if reCAPTCHA (by Google) is enabled by the site owner, the sharing party’s IP address will be shared with that service. You can find Google’s privacy policy here.
Simple Payments
This feature is only available to sites on the Premium and Professional plans, and the actual payment processing is handled by PayPal.
Data Used: Transaction amount, transaction currency code, product title, product price, product ID, order quantity, PayPal payer ID, and PayPal transaction ID.
Activity Tracked: The PayPal payer ID, transaction ID, and HTTP referrer are sent with a payment completion tracking event that is attached to the site owner.
Data Synced (?): PayPal transaction ID, PayPal transaction status, PayPal product ID, quantity, price, customer email address, currency, and payment button CTA text.
Because payments are processed by PayPal, we recommend reviewing its privacy policy.
Subscriptions
Data Used: To initiate and process subscriptions, the following information is used: subscriber’s email address and the ID of the post or comment (depending on the specific subscription being processed). In the event of a new subscription being initiated, we also collect some basic server data, including all of the subscribing user’s HTTP request headers, the IP address from which the subscribing user is viewing the page, and the URI which was given in order to access the page (REQUEST_URI and DOCUMENT_URI). This server data used for the exclusive purpose of monitoring and preventing abuse and spam.
Activity Tracked: Functionality cookies are set for a duration of 347 days to remember a visitor’s blog and post subscription choices if, in fact, they have an active subscription.
Video Hosting
This feature is only available to sites on the Premium and Professional plans.
Data Used: For video play tracking via WordPress.com Stats, the following information is used: viewer’s IP address, WordPress.com user ID (if logged in), WordPress.com username (if logged in), user agent, visiting URL, referring URL, timestamp of event, browser language, country code. If Google Analytics is enabled, video play events will be sent there, as well.
Activity Tracked: Video plays.
WooCommerce Services
Data Used: For payments with PayPal or Stripe: purchase total, currency, billing information. For taxes: the value of goods in the cart, value of shipping, destination address. For checkout rates: destination address, purchased product IDs, dimensions, weight, and quantities. For shipping labels: customer’s name, address as well as the dimensions, weight, and quantities of purchased products.
Data Synced (?): For payments, we send the purchase total, currency and customer’s billing information to the respective payment processor. Please see the respective third party’s privacy policy (Stripe’s Privacy Policy and PayPal’s Privacy Policy) for more details. For automated taxes we send the value of goods in the cart, the value of shipping, and the destination address to TaxJar. Please see TaxJar’s Privacy Policy for details about how they handle this information. For checkout rates we send the destination ZIP/postal code and purchased product dimensions, weight and quantities to USPS or Canada Post, depending on the service used. For shipping labels we send the customer’s name, address as well as the dimensions, weight, and quantities of purchased products to EasyPost. We also store the purchased shipping labels on our server to make it easy to reprint them and handle support requests.
WordPress.com Secure Sign On
This feature is only accessible to registered users of the site with WordPress.com accounts.
Data Used: User ID (local site and WordPress.com), role (e.g. administrator), email address, username and display name. Additionally, for activity tracking (see below): IP address, WordPress.com user ID, WordPress.com username, WordPress.com-connected site ID and URL, Jetpack version, user agent, visiting URL, referring URL, timestamp of event, browser language, country code.
Activity Tracked: The following usage events are recorded: starting the login process, completing the login process, failing the login process, successfully being redirected after login, and failing to be redirected after login. Several functionality cookies are also set, and these are detailed explicitly in our Cookie documentation.
Data Synced (?): The user ID and role of any user who successfully signed in via this feature.
WordPress.com Stats
Data Used: IP address, WordPress.com user ID (if logged in), WordPress.com username (if logged in), user agent, visiting URL, referring URL, timestamp of event, browser language, country code. Important: The site owner does not have access to any of this information via this feature. For example, a site owner can see that a specific post has 285 views, but he/she cannot see which specific users/accounts viewed that post. Stats logs — containing visitor IP addresses and WordPress.com usernames (if available) — are retained by Automattic for 28 days and are used for the sole purpose of powering this feature.
Activity Tracked: Post and page views, video plays (if videos are hosted by WordPress.com), outbound link clicks, referring URLs and search engine terms, and country. When this module is enabled, Jetpack also tracks performance on each page load that includes the Javascript file used for tracking stats. This is exclusively for aggregate performance tracking across Jetpack sites in order to make sure that our plugin and code is not causing performance issues. This includes the tracking of page load times and resource loading duration (image files, Javascript files, CSS files, etc.). The site owner has the ability to force this feature to honor DNT settings of visitors. By default, DNT is currently not honored.
WordPress.com Toolbar
This feature is only accessible to registered users of the site who are also logged in to WordPress.com.
Data Used: Gravatar image URL of the logged-in user in order to display it in the toolbar and the WordPress.com user ID of the logged-in user. Additionally, for activity tracking (detailed below): IP address, WordPress.com user ID, WordPress.com username, WordPress.com-connected site ID and URL, Jetpack version, user agent, visiting URL, referring URL, timestamp of event, browser language, country code.
Activity Tracked: Click actions within the toolbar.